MeshCore Protocol Specification

Section 6: Payload — Encrypted (REQ / RESPONSE / TXT_MSG)

Overview

The REQUEST, RESPONSE, and TXT_MSG payload types share an identical wire format. They consist of a destination hash, source hash, and an encrypt-then-MAC ciphertext blob. The three types differ only in their semantic meaning at the application layer.

Payload Types

Wire Format

 0
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| dest_hash(1)  |  src_hash(1)  |    Cipher MAC (2 bytes)       |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                                                               |
|              Ciphertext (N × 16 bytes, N ≥ 1)                |
|                                                               |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Fields

Minimum Size

• Minimum payload: 4 + 16 = 20 bytes (dest_hash + src_hash + MAC + 1 AES block)

Encryption

The ciphertext is produced using the encrypt-then-MAC scheme described in Section 14:

1. Compute the ECDH shared secret between sender and recipient.
2. Zero-pad the plaintext on the right with 0x00 bytes until its length is a multiple of 16 (AES block size). If the plaintext is already a multiple of 16, no padding is added (the scheme is not unambiguous PKCS#7-style padding — the receiver MUST disambiguate trailing zeros using the inner plaintext format; see “Plaintext Format” below).
3. Encrypt the padded plaintext using AES-128-ECB with the first 16 bytes of the shared secret as the key.
4. Compute HMAC-SHA256 over the ciphertext using the full 32-byte shared secret as the HMAC key. Truncate to 2 bytes.
5. Prepend the 2-byte MAC to the ciphertext.

Decryption

1. Extract dest_hash and src_hash.
2. If dest_hash matches this node, search for peers matching src_hash.
3. For each matching peer, compute or retrieve the shared secret.
4. Verify the MAC: compute HMAC-SHA256 over the ciphertext portion using the full 32-byte shared secret. Compare the first 2 bytes with cipher_mac.
5. If the MAC is valid, decrypt the ciphertext using AES-128-ECB with the first 16 bytes of the shared secret. The decrypted data may contain trailing zero bytes from padding.
6. If no peer’s MAC matches, the packet is not for this node (or the peer is unknown). The packet MAY still be forwarded.

Plaintext Format (TXT_MSG)

For TXT_MSG payloads, the decrypted plaintext has this structure:

Attempt Counter Semantics

The attempt sub-field (bits 0-1 of txt_type_attempt) carries the low two bits of a transmission attempt counter used by the sender’s retry logic. For a given logical TXT_MSG:

• The timestamp field MUST remain stable across all retries of the same message.
• The attempt counter MUST be 0 on the first transmission and MUST be incremented by 1 on each retry.
• Bits 0–1 of txt_type_attempt MUST always carry attempt & 3. These bits are part of the ACK CRC input (see Section 4), so each retry of a message produces a distinct expected ACK CRC.
• For attempts in 0..3, no further encoding is needed; the plaintext ends with the text.
• For attempts > 3, the sender MUST append a 2-byte tail [NUL_terminator(1)][attempt_full(1)] to the plaintext after the text, where attempt_full is the full 1-byte counter value (not just the low 2 bits). The receiver locates the text by scanning for the NUL terminator and recovers the full attempt value from the trailing byte. Because this tail costs 2 bytes of plaintext capacity, the maximum text length is reduced by 2 bytes when attempt > 3.
• The ACK CRC is computed over timestamp(4) || txt_type_attempt(1) || text only. The [NUL][attempt_full] tail (when present) and the implicit C string NUL terminator (when not) are excluded from the hash input. This means a retry with attempt 4 and a retry with attempt 0 produce ACK CRCs that match (since 4 & 3 == 0); senders relying on attempts beyond 3 SHOULD also verify the trailing attempt byte if they need to distinguish rolled-over attempts.

See BaseChatMesh::composeMsgPacket() in src/helpers/BaseChatMesh.cpp for the reference encoding.

Reliable DM Delivery

The following sender-side behavior is informational and documents how interoperating implementations deliver TXT_MSG reliably. Exact timeouts, backoff schedules, and queue depths are implementation-defined; see Section 17 — Sender Behavior for routing-layer details.

• Expected-ACK tracking. On transmit, the sender SHOULD compute the expected ack_crc (see Section 4) and record it in a pending-ACK table keyed by CRC. The table SHOULD bound entries by capacity and age out entries after the retry schedule has completed (plus a margin for in-flight ACKs).
• Retry. If no matching ACK is received within an implementation-defined timeout, the sender SHOULD retransmit with attempt incremented (per “Attempt Counter Semantics” above) and re-register the new expected ack_crc. Up to 4 attempts are representable in the 2-bit attempt field.
• ACK consumption. On receipt of a PAYLOAD_TYPE_ACK or a MULTIPART-wrapped ACK whose ack_crc matches a pending entry, the sender MUST treat the message as delivered, remove the pending-ACK entry, and cancel any queued retries for that CRC.
• Duplicate DM handling at the receiver. A receiver MAY cache its most recent reply per peer keyed by the inbound DM’s plaintext and, on a duplicate inbound DM within a short window, re-emit the cached reply as a loss-recovery optimization. This is not normative; the normative behavior is “process once and rely on Section 16 dedup.” Implementations that re-emit cached replies SHOULD suppress re-emission while a retry for that reply is still pending, to avoid piling on.

Plaintext Format (REQUEST / RESPONSE)

The plaintext format for REQUEST and RESPONSE is application-defined. Common patterns include:

• REQUEST: [timestamp(4)][request_data...]
• RESPONSE: [timestamp(4)][response_data...]

Cross-References

• Section 14: Cryptography — Encrypt-then-MAC details
• Section 15: Identity — ECDH shared secret computation
• Test vectors: corpus/payloads/encrypted/

Reference Implementation

• Mesh::createDatagram() in src/Mesh.cpp — Encoding
• Mesh::onRecvPacket(), cases PAYLOAD_TYPE_REQ/RESPONSE/TXT_MSG — Decoding
• Utils::encryptThenMAC() in src/Utils.cpp — Encryption
• Utils::MACThenDecrypt() in src/Utils.cpp — Decryption and verification