MeshCore Protocol Specification

Section 4: Payload — ACK

Overview

The ACK (acknowledgment) payload is the simplest payload type. It consists of a single 4-byte CRC value used to confirm receipt of a previously sent message. The CRC is a truncated SHA-256 over the original TXT_MSG plaintext prefix concatenated with the sender’s public key.

Payload Type

Header payload type field: 0x03 (ACK)

Wire Format

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                      ACK CRC (uint32_le)                      |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Fields

ACK CRC Computation

The 4-byte ACK CRC is computed as the first 4 bytes of a SHA-256 digest over the acknowledged TXT_MSG’s plaintext prefix followed by the sender’s Ed25519 public key:

ack_crc = SHA-256( plaintext_prefix || sender_pub_key )[0..3]

Where plaintext_prefix is the TXT_MSG plaintext up to and including the message text, excluding any trailing NUL terminator:

plaintext_prefix = timestamp_le(4) || txt_type_attempt(1) || text

• timestamp_le and txt_type_attempt are defined in Section 6.
• text is the raw UTF-8 message bytes with no NUL terminator.
• sender_pub_key is the full 32-byte Ed25519 public key of the node that originated the TXT_MSG (i.e., the node expecting this ACK back).

For TXT_TYPE_SIGNED_PLAIN messages, the 4-byte signature prefix is included:

plaintext_prefix = timestamp_le(4) || txt_type_attempt(1) || signature(4) || text
ack_crc = SHA-256( plaintext_prefix || receiver_pub_key )[0..3]

Note the SIGNED_PLAIN variant hashes against the receiver’s public key; see BaseChatMesh::onPeerDataRecv().

Because txt_type_attempt includes the 2-bit attempt counter, each retry with an incremented attempt produces a different ACK CRC. This lets the sender attribute each received ACK to a specific transmission attempt. See Section 6: Reliable DM Delivery.

Encoding

1. Compute the 4-byte CRC value for the message being acknowledged (above).
2. Write the CRC as a little-endian 32-bit unsigned integer.
3. Set payload_len to 4.

Decoding

1. Read 4 bytes from the payload as a little-endian uint32.
2. If fewer than 4 bytes are available, the packet is INVALID.

Constraints

• The payload MUST be exactly 4 bytes.
• Implementations SHOULD log or discard ACK packets with payload_len < 4.

Cross-References

• Section 1: Wire Format — Packet framing
• Section 11: Multipart — Multipart ACK encoding
• Test vectors: corpus/payloads/ack/

Reference Implementation

• Mesh::createAck() in src/Mesh.cpp — Packet construction
• BaseChatMesh::composeMsgPacket() in src/helpers/BaseChatMesh.cpp — Sender-side expected-ACK computation (expected_ack)
• BaseChatMesh::onPeerDataRecv() in src/helpers/BaseChatMesh.cpp — Receiver-side ACK CRC computation (ack_hash)
• ACK reception in Mesh::onRecvPacket(), case PAYLOAD_TYPE_ACK